Connector for two-pin track assemblies

Details Connector for two-pin track assemblies Connector for two-pin track assemblies

B - Operations, Transporting

62

D

305/63

B62D 55/18 (2006.01) B62D 55/21 (2006.01)

Patent

CA 1208261

ABSTRACT In track systems based on the two-track pin principle having connectors arranged on the track pin ends, considerable loads are imposed on the track pins as a result of the fact that drive sprocket teeth mesh with the connectors. This means that the rubber bushings and the track pins and the track plates themselves have to be of suitable dimensions. By arranging the connectors (7,8; 45; 50) within the track plates (1,6) meshing of the drive sprocket in the track plate can be arranged so that the track pins (4; 42; 55) are relieved of the stresses caused by the meshing process, and for this reason the above component elements can be of smaller dimensions. Simple installation and removal of the track plates (1,6) is made possible by the configuration of the connectors (7,8; 45; 50) as two clamps (17,18; 47,48; 53,56) that can be inserted into each other and connected to each other by means of a screw connector (30;49).

448568

Affiliated with

Also associated with

Rating

Connector for two-pin track assemblies does not yet have a rating. At this time, there are no reviews or comments for this patent.

If you have personal experience with Connector for two-pin track assemblies, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Connector for two-pin track assemblies will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFCA-PAI-O-1255884