E - Fixed Constructions – 02 – D
Patent
E - Fixed Constructions
02
D
61/4.5
E02D 5/20 (2006.01) E02D 5/03 (2006.01) E02D 5/14 (2006.01) E02D 19/18 (2006.01)
Patent
CA 1224929
ENVIRONMENTAL CUT-OFF FOR DEEP EXCAVATIONS ABSTRACT OF THE DISCLOSURE High density polyethylene sheets are installed in panel forms to form an impervious barrier to fluid flow particularly corrosive contaminates and pollutants. A slit is excavated in the earth under a bentonite slurry to the required depth. A relatively thick, nigh density poly- ethylene sheet is placed in the trench and connected to two high density polyethylene pipes or channel members, the width of which, in the direction transverse to the direc- tion of the wall, is the width of the trench. The panel length typically will be 15 to 30 feet. Once the high den- sity polyethylene panel is installed, the slurry is dis- placed on both sides by a backfill material that can be a soil-bentonite, cement-bentonite or concrete. A secondary panel section intermediate two previously formed primary panels is made using a secondary panel of high density poly- ethylene similarly constructed but using smaller diameter pipe or channel members than the primary panel pipes. This panel is then lifted and the two smaller pipes or channels lowered into the primary panel pipes or channels with the high density polyethylene panel extending between through two slots or openings in facing primary panel pipe or channel elements. A non-shrinking grout is then pumped into the pipe connection to form a tight joint.
447968
Finic B.v.
Macrae & Co.
LandOfFree
Environmental cut-off for deep excavations does not yet have a rating. At this time, there are no reviews or comments for this patent.
If you have personal experience with Environmental cut-off for deep excavations, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Environmental cut-off for deep excavations will most certainly appreciate the feedback.
Profile ID: LFCA-PAI-O-1274787