Process for casting aluminum alloys

Details Process for casting aluminum alloys Process for casting aluminum alloys

B - Operations, Transporting

22

C

22/190

B22C 1/02 (2006.01) B22C 3/00 (2006.01) B22C 9/12 (2006.01) B22D 21/00 (2006.01) B22D 21/04 (2006.01) B22D 27/20 (2006.01)

Patent

CA 1288210

PROCESS FOR CASTING ALUMINUM ALLOYS ABSTRACT OF THE DISCLOSURE The technical properties of aluminum alloys, particularly tensile strength, yield strength and elongation percent, can be improved by refining the grain of the casting. For that purpose, particular attention must be paid to obtaining the smallest possible intervals between the second- ary dendrite arms. Seeding the melt by adding seeds with a pre-alloy does not bring satisfactory results, particularly with respect to the dendrite arm intervals. Small dendrite arm intervals and good technical values can be reliably obtained by casting the aluminum alloys in a ceramic mold with numerous micro-sized rough spots and pores and applying to the inner wall of the mold after it is dried and fired a thin layer of a salt mixture in which the cations are primarily from alkalis and/or alkaline earths and the anions are primarily from halogens and which has a liquidus temperature lower than the casting temperature of the alloy.

505669

Affiliated with

Also associated with

Rating

Process for casting aluminum alloys does not yet have a rating. At this time, there are no reviews or comments for this patent.

If you have personal experience with Process for casting aluminum alloys, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Process for casting aluminum alloys will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFCA-PAI-O-1338605