C - Chemistry – Metallurgy – 08 – L
Patent
C - Chemistry, Metallurgy
08
L
C08L 23/10 (2006.01)
Patent
CA 2544683
A propylene polymer composition comprising the following components: a) from 50% to 90% by weight of a propylene homopolymer or a propylene copolymer containing up to 5% by mol of derived units of C2-C20 alpha-olefins, having the following features: (i) a polydispersity index PI>3; (ii) melt flow rate (MFR), as measured at 230~C under a load of 2.16 kg, MFR>1 dg/min; and (iii) fraction soluble in xylene at 25~C (XSRT)>1% b) from 5% to 25% by weight a copolymer of ethylene and one or more derived units of C4-C20 alpha-olefins having the following features: (i) content of ethylene derived units higher than 50% by mol and lower than 92% by mol; (ii) intrinsic viscosity (IV) higher than 1.2 dL/g and lower than 6 dL/g; (iii) density ranging from 0.850 to 0.890 g/cm3; and (iv) a crystallinity content, expressed as the enthalpy of fusion, lower than 62 J/g c) from 5% to 25% by weight of a copolymer of propylene and ethylene having the following features: (i) content of propylene derived units higher than 50% by mol and lower than 92% by mol; (ii) intrinsic viscosity (IV) higher than 2 dL/g and lower than 6 dL/g; (iii) density ranging from 0.850 to 0.890 g/cm3; (iv) the value of the product of reactivity ratios rlxr2 lower than 2; and (v) a crystallinity content, expressed as the enthalpy of fusion, lower than 45 J/g wherein the weight ratio between the ethylene copolymer (component b) and the sum of component b) and component c) is equal to or higher than 0.5 and less than or equal to 0.9.
Composition de polymère de polypropylène comportant les constituants suivants: a) de 50 % à 90 % en poids d'un homopolymère de propylène ou d'un copolymère de propylène contenant jusqu'à 5 %/mole de motifs dérivés d'alpha-oléfines C¿2?-C¿20?, avec les caractéristiques suivantes: (i) un indice de polydispersité PI > 3; (ii) un indice de fluage (MFR), tel que mesuré à 230 ·C sous une charge de 2,16 kg, MFR > 1 dg/min; et (iii) une fraction soluble dans le xylène à 25 ·C (XSRT) > 1 %; b) de 5 % à 25 % en poids d'un copolymère d'éthylène et d'au moins un motif dérivé d'alpha-oléfines C¿4?-C¿20? avec les caractéristiques suivantes: (i) une teneur en motifs dérivés d'éthylène supérieure à 50 %/mole et inférieure à 92 %/mole; (ii) une viscosité intrinsèque (IV) supérieure à 1,2 dL/g et inférieure à 6 dL/g; (iii) une densité comprise entre 0,850 et 0,890 g/cm?3¿; et (iv) une teneur en cristallinité, exprimée sous forme de l'enthalpie de fusion, inférieure à 62 J/g; c) de 5 % à 25 % en poids d'un copolymère de propylène et d'éthylène avec les caractéristiques suivantes: (i) une teneur en motifs dérivés de propylène supérieure à 50 %/mole et inférieure à 92 %/mole; (ii) une viscosité intrinsèque (IV) supérieure à 1,2 dL/g et inférieure à 6 dL/g; (iii) une densité comprise entre 0,850 et 0,890 g/cm?3¿; (iv) la valeur du produit des rapports de réactivité r1 x r2 étant inférieure à 2; et (v) une teneur en cristallinité, exprimée sous forme de l'enthalpie de fusion, inférieure à 45 J/g, le rapport pondéral entre le copolymère d'éthylène (constituant b)) et la somme du constituant b) et du constituant c) étant égal ou supérieur à 0.5 et égal ou inférieur à 0,9.
Berta Dominic A.
Pellegatti Giampaolo
Basell Poliolefine Italia S.r.l.
Fetherstonhaugh & Co.
LandOfFree
Polypropylene composition does not yet have a rating. At this time, there are no reviews or comments for this patent.
If you have personal experience with Polypropylene composition, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Polypropylene composition will most certainly appreciate the feedback.
Profile ID: LFCA-PAI-O-1428017