G - Physics – 01 – F
Patent
G - Physics
01
F
G01F 23/296 (2006.01)
Patent
CA 2234905
An assembly for monitoring a predetermined level of a material in a container comprises two ultrasonic transducers mounted on the container in line with the level to be monitored, such that an interspace exists between the ultrasonic transducers into which the material enters on attaining the level to be monitored. The one ultrasonic transducer is an emitter transducer which at predetermined points in time for emitting ultrasonic pulses is energized by a frequency which is so low that the ultrasonic pulses are transmitted through the interspace to the detector transducer even when the interspace is filled with air. The other ultrasonic transducer is a detector transducer which converts detected ultrasonic pulses into electrical detection signals. To determine whether or not material is in the interspace between the ultrasonic transducers a check is made as to whether the detector transducer outputs after each point in time of emission a detection signal in a time interval corresponding to the transit time of the ultrasonic pulses from the emitter transducer to the detector transducer in air.
Assemblage de surveillance du niveau prédéterminé d'un matériau dans un récipient. L'assemblage comprend deux transducteurs ultrasoniques montés sur le récipient, qui sont alignés avec le niveau de matériau à surveiller de sorte qu'un espacement existe entre les transducteurs ultrasoniques dans lesquels le matériau faisant l'objet d'une surveillance pénètre lorsqu'il atteint le niveau à surveiller. Un transducteur ultrasonique est un transducteur-émetteur qui, à un moment prédéterminé d'émission de pulsations ultrasoniques, est donc excité par une fréquence tellement faible que les pulsations ultrasoniques sont transmises à travers l'espacement entre le transducteur-détecteur même si l'espacement est rempli d'air. L'autre transducteur ultrasonique est en fait un transducteur-détecteur qui convertit les pulsations ultrasoniques en signaux électriques de détection. Pour déterminer si le matériau se trouve dans l'espacement formé entre les transducteurs ultrasoniques, il faut vérifier si le transducteur-détecteur émet à chaque moment prédéterminé un signal de détection dans un intervalle de temps correspondant au moment de transit, dans l'air, des impulsions ultrasoniques entre le transducteur-émetteur et le transducteur-détecteur.
Getman Igor
Lopatin Sergej
Endress + Hauser Gmbh + Co.
Fetherstonhaugh & Co.
LandOfFree
Method and assembly for monitoring a predetermined level in... does not yet have a rating. At this time, there are no reviews or comments for this patent.
If you have personal experience with Method and assembly for monitoring a predetermined level in..., we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Method and assembly for monitoring a predetermined level in... will most certainly appreciate the feedback.
Profile ID: LFCA-PAI-O-1564362