H - Electricity – 02 – M
Patent
H - Electricity
02
M
321/46
H02M 7/527 (2006.01)
Patent
CA 2003603
Inverters (5.1, 5.2) for feeding a three-phase load such as, for example, an asynchronous machine (6), are controlled by pulse width modulation, in such a manner that they supply output voltages (U5.1R, U5.2R) which are as closely sinusoidal as possible, having few harmonics per alternating-current phase (R, S, T). To achieve the pulse width modulation, a first auxiliary alternating voltage (U~1) of a sawtooth generator (1.1), on the one hand, and a second auxiliary alternating voltage (U~2) of a sawtooth generator (1.2), which is phase-shifted by 180° with respect to the first one, on the other hand, is superimposed by a control signal transmitter (2) on a sinusoidal first superimposition alternating voltage (UStR, UStS, UStT) with the required frequency and phase angle in logic circuits (3.1, 3.2). Separate inverter groups (5.1, 5.2), the outputs of which are connected via a reactor coil (7), the center tab of which is connected to a stator winding (WR) of the asynchronous machine (6), are controlled in dependence on intersections of the two superimposition voltages in each case. To reduce the turn-on and turn-off losses, the thyristors (T1, T1'; T2, T2 ' ) of the inverter are only switched over at intersections of the rising portion of the auxiliary alternating voltage (U~1, U~2). During this process, the inverter sections of the two phases (R, S, T), the first superimposition alternating voltage of which has been intersected are in each case switched at two successive intersections whilst the inverter sections of the adjacent phases are switched over at the subsequent third intersection. This allows the switching actions to be reduced by 1/3.
Des onduleurs permettant d'alimenter une charge triphasée, par exemple une machine asynchrone (6), sont commandés par modulation d'impulsions en durée de façon à produire des tensions de sortie (U5.1R, U5.2R) qui sont aussi sinusoïdales que possible, ayant peu d'harmoniques par phase de courant alternatif (R, S, T). Pour réaliser la modulation d'impulsions en durée, une première tension alternative auxiliaire (U~1) d'un générateur de dents de scie (1.1), d'une part, et une deuxième tension alternative auxiliaire (U~2) d'un générateur de dents de scie (1.2) déphasée de 180 degrés par rapport à la première, d'autre part, sont superposées dans des circuits logiques (3.1, 3.2) par un émetteur de signal de commande (2) à une première tension alternative sinusoïdale (UStR, UStS, UStT) avec la fréquence et l'angle de phase nécessaires. Des groupes d'onduleurs distincts (5.1, 5.2), dont les sorties sont connectées par l'intermédiaire d'une bobine de réactance (7) dont la prise médiane est connectée à un enroulement d'induit (WR) de la machine asynchrone (6), sont commandés à partir d'intersections des deux tensions de superposition dans chaque cas. Pour réduire les pertes au blocage et au déblocage, les thyristors (T1, T1'; T2, T2') de l'onduleur sont commutés seulement aux intersections de la partie montante de la tension alternative auxiliaire (U~1, U~2). Pendant ce processus, les sections d'onduleur des deux phases (R, S, T) dont la première tension alternative de superposition a fait l'objet d'une intersection sont dans chaque cas commutées à deux intersections successives pendant que les sections d'onduleur des phases adjacentes sont commutées à la troisième intersection suivante. On peut ainsi réduire du tiers les manoeuvres de commutation.
Asea Brown Boveri Ltd.
Swabey Ogilvy Renault
LandOfFree
Method for controlling a three-phase inverter does not yet have a rating. At this time, there are no reviews or comments for this patent.
If you have personal experience with Method for controlling a three-phase inverter, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Method for controlling a three-phase inverter will most certainly appreciate the feedback.
Profile ID: LFCA-PAI-O-1798900