B - Operations – Transporting – 29 – C
Patent
B - Operations, Transporting
29
C
B29C 71/00 (2006.01) B05D 3/02 (2006.01) B05D 7/02 (2006.01) B29C 35/06 (2006.01) E06B 3/62 (2006.01) E06B 7/23 (2006.01) B29C 35/04 (2006.01) B29C 47/00 (2006.01)
Patent
CA 2252668
Profiled sections (1), in particular extruded seals made of elastic material, can be designed and produced economically and in such a way that they have absolute storage stability and low coefficients of friction and are suitable for a wide variety of uses, in the profiled sections (1) are made of a non- lacquer-repelling material and after having left the extruder (12) and before entering the fused salt bath (16) are coated with a lubricating lacquer (7) applied to the uncured surface (5). The lubricating lacquer (7) is then cured in the fused salt bath (16) without there being a need for a separate curing section or similar. An advantage of this method is that it not only evenly coats the profiled sections with lubricating lacquer (7) but also prevents the information of air bubbles or the like, thereby yielding a consistently even coating (6).
Des profilés (1), notamment des profilés d'étanchéité en matériau élastique peuvent être conçus et produits de manière économique et absolument stable au stockage, avec de faibles coefficients de friction, pour les applications les plus diverses, si lesdits profilés (1) sont réalisés dans un matériau ne repoussant pas la laque, et si après avoir quitté l'extrudeuse (12) et avant d'entrer dans les sels fondus (16), ils sont recouverts de laque lubrifiante (7) appliquée sur la surface (5) non vulcanisée. Le durcissement de la laque lubrifiante (7) intervient ensuite dans les sels fondus (16), sans qu'une section de durcissement séparée ou similaire ne soit requise. Il est avantageux qu'outre le fait de permettre d'obtenir un revêtement régulier avec de la laque lubrifiante (7), ce procédé permet notamment d'éviter entre autres la formation de bulles d'air, de manière à parvenir à un revêtement (6) constamment homogène.
Berens Werner
Kientz Paul
Fetherstonhaugh & Co.
Saar-Gummiwerk Gmbh
LandOfFree
Method for producing profiled sections coated with... does not yet have a rating. At this time, there are no reviews or comments for this patent.
If you have personal experience with Method for producing profiled sections coated with..., we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Method for producing profiled sections coated with... will most certainly appreciate the feedback.
Profile ID: LFCA-PAI-O-1911023