Centered-leg roller cone drill bit

Details Centered-leg roller cone drill bit Centered-leg roller cone drill bit

E - Fixed Constructions

21

B

E21B 10/08 (2006.01) E21B 10/14 (2006.01) E21B 10/20 (2006.01) E21B 10/26 (2006.01) E21B 10/28 (2006.01) E21B 17/10 (2006.01)

Patent

CA 2343282

A drill bit including a roller cone and fixed cutters positioned external to the roller cone and radially from the bit axis of rotation. The roller cone is located so that a drill diameter of the cone is substantially concentric with an axis of rotation of the bit. The fixed cutters can be made of tungsten carbide, polycrystalline diamond, boron nitride, or any other superhard material. The fixed cutters are positioned to either maintain the hole diameter drilled by the roller cone or to drill a larger diameter hole than the hole drilled by the roller cone. The single roller cone may be located in the center of a multi-cone bit arrangement or in the center of a PDC bit to assist in drilling the center of a wellbore. The single roller cone may be used to form a bi-center bit in combination with a reaming section. The single roller cone may also be located on an independent sub that is removably attached to the bit body.

Affiliated with

Also associated with

Rating

Centered-leg roller cone drill bit does not yet have a rating. At this time, there are no reviews or comments for this patent.

If you have personal experience with Centered-leg roller cone drill bit, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Centered-leg roller cone drill bit will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFCA-PAI-O-1920121