B - Operations – Transporting – 63 – B
Patent
B - Operations, Transporting
63
B
B63B 21/26 (2006.01) B63B 21/29 (2006.01) B63B 21/32 (2006.01) B63B 21/38 (2006.01)
Patent
CA 2348078
A marine anchoring arrangement is described wherein a marine anchor (1, 23) is drivingly embedded vertically into a mooring bed (10) by an elongate follower (13), especially by its own weight and that of the follower. The follower (13) has a bottom clevis part (103) adapted to hold detachably the anchor (1) via the anchor shank (2) by means of a fulcrum pin (17) whereby the anchor (1) may swing relative to the bottom part (103). For initial penetration. the anchor (1) is held in a position of minimum forward resistance, specifically with the forward direction F of the fluke (3) parallel to the follower axis (20) and this is achieved by a shear pin (109) between the anchor (1) and the bottom part (103). When the anchor (1) is embedded to a preferred depth (d) specifically at least twice the square root of the maximum projected fluke area (as viewed normal to direction F), the anchor (23) is moved to a position for anchor setting by pulling on an attached anchor cable (4/4A) so causing the shear pin (109) to fracture and the anchor (23) to rotate about the fulcrum axis until arrested by a stop (21) on the follower (13). The follower (13) can then be pulled clear and recovered. The above anchoring arrangement provides a considerably improved anchoring performance in comparison with existing direct embedment arrangements.
L'invention porte sur des dispositifs d'ancrage marins. Une ancre (1, 23) marine est entraînée et encastrée verticalement dans un fond (10) d'amarrage par un suiveur (13) allongé, notamment par son propre poids et celui du suiveur. Le suiveur (13) comporte une partie (103) chape inférieure conçue pour retenir amovible l'ancre (1) par l'intermédiaire de la tige (2) au moyen d'un axe de pivotement, l'ancre (1) pouvant ainsi pivoter par rapport à la partie (103) inférieure. Lors d'une première pénétration, l'ancre (1) est retenue dans une position de résistance vers l'avant minimale, spécifiquement dans la direction avant F de la patte (3) parallèle à l'axe (20) de pivotement, et ceci par une goupille de cisaillement (109) située entre l'ancre (1) et la partie (103) inférieure. Lorsque l'ancre (1) est encastrée à une profondeur (d) préférée, spécifiquement à au moins deux fois la racine carrée de la projection maximale de la surface de la patte (perpendiculairement à la direction F), l'ancre (23) se déplace vers une position d'ancrage par traction du câble (4/4A) relié à celle-ci de manière à fracturer la goupille de cisaillement (109) et à faire tourner l'ancre (23) autour de l'axe de pivotement jusqu'à ce qu'elle soit arrêtée par une butée (21) placée sur le suiveur (13). Le suiveur (13) peut ensuite être tiré libre et récupéré. Le dispositif d'ancrage précité assure une bien meilleure performance d'ancrage en comparaison avec des dispositifs d'ancrage direct existants.
Brupat Limited
Oyen Wiggs Green & Mutala Llp
LandOfFree
Improvements in marine anchors does not yet have a rating. At this time, there are no reviews or comments for this patent.
If you have personal experience with Improvements in marine anchors, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Improvements in marine anchors will most certainly appreciate the feedback.
Profile ID: LFCA-PAI-O-1936905