Device and process for a flow rate test of a tank connector

Details Device and process for a flow rate test of a tank connector Device and process for a flow rate test of a tank connector

G - Physics

01

M

G01M 3/02 (2006.01) B60K 15/00 (2006.01) G01M 3/26 (2006.01)

Patent

CA 2299196

For determining the adequate perviousneas of venting tube nipples (4) on fuel tanks (3) made of plastics material a test duct (12) is connected to the nipple (4) and air drawn into the test duct (12) from the tank (3). From measuring the partial vacuum of e.g. approx. 5 mbar or the volume flow rate in the test ducts (12) it can be determined whether the nipple (4) and its joint (9) to the tank (3) are sufficiently permeable. This test is very precise and silent and needs only little consumption of compressed air. Thereby the load on the sealing seat (14) between the test duct (12) and nipple (4) is only slight.

Affiliated with

Also associated with

Rating

Device and process for a flow rate test of a tank connector does not yet have a rating. At this time, there are no reviews or comments for this patent.

If you have personal experience with Device and process for a flow rate test of a tank connector, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Device and process for a flow rate test of a tank connector will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFCA-PAI-O-1979445