One-piece fitment and cap with tamper-evident band

Details One-piece fitment and cap with tamper-evident band One-piece fitment and cap with tamper-evident band

B - Operations, Transporting

65

D

B65D 41/34 (2006.01) B65D 5/74 (2006.01) B65D 39/00 (2006.01) B65D 39/08 (2006.01) B65D 55/02 (2006.01) B65D 75/58 (2006.01)

Patent

CA 2121890

A fitment (11) and cap (12) therefor are integrally molded with lugs (51) interconnecting the parts. The fitment has a flange (16) to be attached to a container and an internally threaded spout (19). The cap has an externally threaded skirt (32). The lugs are diametrically spaced and interconnect the bottom edge of the skirt and upper edge of the spout. After molding, force is appli- ed to break the lugs and snap the skirt inside the spout, the threads slipping past each other and interengaging. A tamper-evident band (41) extends around the skirt and is connected thereto by frangible bridges (42). At diametrically spaced locations vertically projecting fingers (48) extend down from the tamper evident band and are received in sockets on the fitment flange shape so that the band fingers prevent unscrewing the cap without removing the tamper-evident band. A pull tab (44) and thumb tab (46) assist the consumer in removing the tamper evident band so that the cap may be unscrewed from the fitment.

Affiliated with

Also associated with

Rating

One-piece fitment and cap with tamper-evident band does not yet have a rating. At this time, there are no reviews or comments for this patent.

If you have personal experience with One-piece fitment and cap with tamper-evident band, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and One-piece fitment and cap with tamper-evident band will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFCA-PAI-O-2032319