F - Mech Eng,Light,Heat,Weapons – 27 – B
Patent
F - Mech Eng,Light,Heat,Weapons
27
B
39/23
F27B 7/32 (2006.01)
Patent
CA 1082915
ABSTRACT OF THE DISCLOSURE A refractory siphon tube is inserted through the axial discharge opening of a rotary melting furnace and down through the slag into the metal within the furnace. Molten metal is withdrawn continuously by suction through the tube into an enclosed chamber maintained under a controlled negative suction pressure through a suction manifold connecting with a receiver, vacuum pump and pressure controller. The enclosed chamber discharges by gravity through a bottom opening, either emptying into a launder with an overflow weir, or discharging directly out through a bottom nozzle equipped with a slide gate shut-off. The metal is discharged continuously at a controlled rate irrespective of any variations in the feed rate and metal depth in the furnace. The metal depth can be varied by periodically varying the suction pressure and thus can provide for intermittent slag discharge by overflowing the annular discharge open- ing. The depth of the enclosed chamber may be varied as desired, a high vacuum pressure being logically employed with the deeper units which thus also act as vacuum degassers for removing dissolved gases in the molten metal. -1-
306539
LandOfFree
Continuous metal melting withdrawal and discharge from... does not yet have a rating. At this time, there are no reviews or comments for this patent.
If you have personal experience with Continuous metal melting withdrawal and discharge from..., we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Continuous metal melting withdrawal and discharge from... will most certainly appreciate the feedback.
Profile ID: LFCA-PAI-O-392830