Snow cruser

Details Snow cruser Snow cruser

A - Human Necessities

63

C

A63C 5/00 (2006.01) B62B 19/04 (2006.01) B62K 17/00 (2006.01) B62M 27/00 (2006.01) E01H 5/00 (2006.01) E01H 6/00 (2006.01)

Patent

CA 2408820

THE SNOW CRUSER FRAME IS BUILD SIMILAR TO A NORMAL BYCICLE ADDITION TO THE FRAME IS THE FORK IN FRONT FOR THE SKIS AND THE FORK FOR THE SNOW DRUM IN THE BACK. HOWEVER THERE IS MORE TO IT THEN THAT. THE BRAKET ON THE SKIS IS TO BE WELDED~~ AND SHOULD BE BOLTED TO THE FORK THE SKIS WOULD BE THE SAME AS ON A NORMAL SKI DOO. FOR SAFETY 2 REFLECTORS SHOULD BE USE YELLOW FOR THE FRONT AND RED FOR THE BACK. THIS SNOW CRUSER IS A CHAIN DRIVE THAT IS WHY THE SPACE IN THE MIDDLE OF THE SNOW DRUM SHOULD BE WIDE ENOUGH SO THE SPROCKET FOR THE SPEED CAN BE INSTALL AS WELL AS THE BRAKES. IF YOU LOOK AT THE BACK VIEW OF THE SNOW DRUM YOU WILL NOTICE THAT THE SNOW GRIPS ARE ON A SLANT THAT IS BECAUSE SO THE SNOW DRUM DON'T SLIDE FROM LEFT TO RIGHT, THE SNOW DRUM SHOULD BE ABOUT 180 CM AROUND 6 FT. I WOULD ADVICE FOR ANYONE USING THIS SNOW CRUSER TO WARE A SAFETY HELMET.

Affiliated with

Also associated with

Rating

Snow cruser does not yet have a rating. At this time, there are no reviews or comments for this patent.

If you have personal experience with Snow cruser, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Snow cruser will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFCA-PAI-O-1953484