High speed tires

Details High speed tires High speed tires

B - Operations, Transporting

60

C

152/126

B60C 11/06 (1980.01)

Patent

CA 1172948

HIGH-SPEED TIRES Abstract of the Disclosure A high-speed tire (10) for use during both wet and drying road surface conditions is disclosed. The tread groove depth increases from a minimum depth near each tread edge to a maximum depth near the mid- circumferential plane (28). Each of an outer group of tread elements (32) has a ground-contacting surface area equal to at least about two square inches (12.90 cm2) and the net-to-gross ratio of the tread central zone is not greater than about 65 percent. Transverse grooves (42) extend from the mid-circumferential plane (28) to a tread edge at an angle relative to the` mid- circumferential plane which is greater than about 75 degrees at the respective tread edge (as shown at 44) and which is less than about 40 degrees at the mid- circumferential plane (as shown at 46). The widths of circumferential grooves (34) progressively decrease as their respective distances from the mid-circumferential plane (28) increase.

435311

Affiliated with

Also associated with

Rating

High speed tires does not yet have a rating. At this time, there are no reviews or comments for this patent.

If you have personal experience with High speed tires, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and High speed tires will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFCA-PAI-O-1212091