Differential pressure sensor

Details Differential pressure sensor Differential pressure sensor

G - Physics

01

L

73/10

G01L 7/08 (2006.01) G01L 9/00 (2006.01) G01L 9/04 (2006.01) G01L 9/12 (2006.01) G01L 13/02 (2006.01)

Patent

CA 1296917

ABSTRACT OF THE DISCLOSURE A cell for sensing differential pressures has a single brittle material diaphragm mounted on support plates positioned on opposite sides of the diaphragm. The diaphragm surfaces when at zero differential pressure facing the support are concave and shaped to conform very closely to the shape the diaphragm has when it is deflected so that when the diaphragm is under a selected pressure and it is forced against one of the supports in either direction, the diaphragm is substantially planar or flat and supported fully on its support plate. The diaphragm may be shaped by placing it under a pressure so that it bows or deflects and then grinding the surface opposite from the applied pressure flat. When the pressure is removed, the diaphragm relaxes and a cavity with the exact required shape is produced on the surface that had been bowed out and ground flat. The same procedure can be done to the other side of the diaphragm or two diaphragm sections may be fixed together.

540107

Affiliated with

Also associated with

Rating

Differential pressure sensor does not yet have a rating. At this time, there are no reviews or comments for this patent.

If you have personal experience with Differential pressure sensor, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Differential pressure sensor will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFCA-PAI-O-1313348