C - Chemistry – Metallurgy – 08 – F
Patent
C - Chemistry, Metallurgy
08
F
402/528
C08F 2/18 (2006.01) B29C 47/00 (2006.01) C08F 114/26 (2006.01) C08F 214/26 (2006.01)
Patent
CA 1215496
- 1 - Abstract: Raw polymer powder of a modified tetrafluoroethylene polymer having a high bulk density and a good powder flow index and also a process for the manufacture and use thereof Novel granular. free-flowing, non-melt-fabricable raw polymer powders of tetrafluoroethylene polymers con- sisting of 0.004 to 0.075 mole % of polymerized units of a perfluoroalkyl vinyl ether and of tetrafluoroethylene units, are described. These powders have an average particle diameter of 450 to 1.400 µm. a bulk density of at least 570 g/l, a powder flow index of ? 5 seconds/50 g and a grain stability of ? 5.5 seconds/50 g. They are prepared direct by suspension polymerizing TFE in the presence of the perfluoroalkyl ether. while stirring, the calculated concentration of the ether in the gas phase being kept within the range from 0.1 to 1.0 % by volume in the period of time until 1.5 % by weight of solid polymer have been formed, and the polymerization being carried out under a total pressure of 5 to 11 bars. A further improvement in bulk density. powder flow and grain stability is achieved if the intensity of stirring is kept at a relatively low level in a critical range, beginning at the formation of 1.5 to 3 % by weight of solid polymer and extending to the formation of 8 to 12 % by weight of solid polymer. The raw polymer powders which can be obtained in this manner are suitable, as such and without further pretreatment, for the production of ram-extruded articles of all types.
379146
Bereskin & Parr Llp/s.e.n.c.r.l.,s.r.l.
Dyneon Gmbh
LandOfFree
Raw polymer powder of a modified tetrafluoroethylene polymer... does not yet have a rating. At this time, there are no reviews or comments for this patent.
If you have personal experience with Raw polymer powder of a modified tetrafluoroethylene polymer..., we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Raw polymer powder of a modified tetrafluoroethylene polymer... will most certainly appreciate the feedback.
Profile ID: LFCA-PAI-O-1327011