Process for lining a tube

Details Process for lining a tube Process for lining a tube

G - Physics

01

F

73/132, 18/965

G01F 1/00 (2006.01) B29C 63/36 (2006.01)

Patent

CA 2039300

A measuring tube for a flowmeter and a process for making the measuring tube. The measuring tube is lined with a tubular lining of thermoplastic material, particularly PTFE or PFA, which comes into contact with the measured substance which flows through the tube. The ends of the tubular lining are flanged around end flanges of the measuring tube after the ends of the tubular lining have been plasticised by heating. The plasticised ends of the tubular lining are turned outward by more than 90° and then forced into undercuts in the end faces of the end flanges. Upon cooling, the ends of the lining are in intimate contact with the end faces of the end flanges and the undercuts in the end faces.

Affiliated with

Also associated with

Rating

Process for lining a tube does not yet have a rating. At this time, there are no reviews or comments for this patent.

If you have personal experience with Process for lining a tube, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Process for lining a tube will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFCA-PAI-O-1416493