Pre-wired injection molding assembly

Details Pre-wired injection molding assembly Pre-wired injection molding assembly

B - Operations, Transporting

29

C

18/703

B29C 45/74 (2006.01) B29C 45/27 (2006.01)

Patent

CA 2022122

A pre-wired injection molding assembly to be supplied to the customer for installation in a mold. The assembly includes a number of sub-manifolds connected to a main manifold, a wiring frame having a number of elongated fingers connected to the sub-manifolds, and a number of heated nozzles connected to the sub-manifolds. The fingers of the wiring frame extend from a hollow channel member which leads to a connector box. The assembly is pre-wired by the supplier by running the wires from the nozzles along the fingers and through the channel member to the connector box. The pre-wired assembly is mounted from the rear in a matching mold manifold plate which greatly facilitates installation and disassembly for the customer.

Unité de moulage par injection pré-câblée à installer dans un moule. L'unité comprend plusieurs collecteurs secondaires raccordés à un collecteur principal, un châssis de câblage comprenant des doigts allongés raccordés aux collecteurs secondaires et plusieurs buses chauffées raccordées aux collecteurs secondaires. Les doigts du châssis de câblage se prolongent à partir d'un conduit creux jusqu'à un boîtier de jonction. L'unité est pré-câblée par le fournisseur qui installe des câbles à partir des buses le long des doigts et à l'intérieur du conduit vers le boîtier de jonction. L'unité pré-câblée est fixée de l'arrière dans une plaque correspondante de collecteur de moule qui facilite le montage et le démontage pour le client.

Affiliated with

Also associated with

Rating

Pre-wired injection molding assembly does not yet have a rating. At this time, there are no reviews or comments for this patent.

If you have personal experience with Pre-wired injection molding assembly, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Pre-wired injection molding assembly will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFCA-PAI-O-1511643