B - Operations – Transporting – 62 – B
Patent
B - Operations, Transporting
62
B
B62B 1/22 (2006.01) B62B 5/00 (2006.01)
Patent
CA 2608266
The Wheel Barrow Tool Holder is an assembly that attaches to the side of a wheel barrow to hold long handled tools. Tools such as a shovel, spade, rake, broom, pitch fork or other similar items. The Wheel Barrow Tool Holder has two clamps that clamp onto the side of a wheel barrow. It also has four screw holes so it can be permanently attached onto the wheel barrow via screws or bolts. The Wheel Barrow Tool Holder comes in one size fit's all, but can be made to different specifications to suit the user. It can be made in different colors, and materials. I have chosen steel as the most durable. Also included are rubber indentation pieces to keep the tools snug inside the indentation to prevent the tools from coming out. The Wheel Barrow Tool Holder also comes with four small bolts to attach the assembly permanently to the wheel barrow via screw holes. How to make it: 1. Weld the clamps onto the steel rod. 2. The tool holder extension rods should be molded or bent to suit the specifications shown. 3. Then the tool holder extension rods will be welded onto the steel rod at the proper places defined in the drawing. 4. Now the whole assembly shall be spray painted red or whatever color chosen. 5. Next the rubber indentation pieces will be glued to the inside of the indentations listed in the drawing. 6. Lastly the screw holes will be drilled at the four locations listed on the drawing.
Na
Thomson Kevin Nicholas
LandOfFree
Wheel barrow tool holder does not yet have a rating. At this time, there are no reviews or comments for this patent.
If you have personal experience with Wheel barrow tool holder, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Wheel barrow tool holder will most certainly appreciate the feedback.
Profile ID: LFCA-PAI-O-1597663