C - Chemistry – Metallurgy – 03 – B
Patent
C - Chemistry, Metallurgy
03
B
49/8.1
C03B 37/06 (2006.01)
Patent
CA 1213440
Abstract of the Disclosure A process and an apparatus for the division of melts A drawing nozzle for finely dividing melts according to the nozzle blasting process, wherein a) the contour of the nozzle inlet from the upper edge of the nozzle passes initially inside a radius R1 = 40% of the narrowest cross-sectional dimension d of the drawing nozzle and then runs parallel to, or diverges by up to 2° from the drawing nozzle axis up to a depth below the upper edge of the drawing nozzle which is not greater than the narrowest cross- sectional dimension d of the drawing nozzle; b) the nozzle inlet is immediately adjoined by the drawing-out part, the upper cross-sectional dimen- sion of which is from 1.5 to 2.4 times as wide as the narrowest cross-sectional dimension d of the drawing nozzle; c) the drawing-out part widens over a length of at least 6 times the narrowest cross-sectional dimension d of the drawing nozzle with a widening angle of from 1 to 2.4° and, d) in the intermediate cross section between the lower edge of the nozzle inlet and the upper edge of the drawing-out part, there are provided propulsion jet nozzles, the axis of which is inclined by from 5 to -2° to the drawing nozzle.
447773
Chalupka Georg
Muschelknautz Edgar
Rink Norbert
Aktiengesellschaft Bayer
Fetherstonhaugh & Co.
LandOfFree
Process and an apparatus for the division of melts does not yet have a rating. At this time, there are no reviews or comments for this patent.
If you have personal experience with Process and an apparatus for the division of melts, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Process and an apparatus for the division of melts will most certainly appreciate the feedback.
Profile ID: LFCA-PAI-O-1229809